FutureCool

Kom i kontakt med vores team

📍
Besøg vores kontor
Bakken 3, 7120 Vejle Ø
Denmark
Kort forhåndsvisning
📞
Ring til os
+45 8862 4848
✉️
Send os en email
info@futurecool.dk
Contact Popup - FutureCool
FutureCool

Get in touch with our team

📍
Visit Our Office
Bakken 3, 7120 Vejle Ø
Denmark
Map preview
📞
Call Us
+45 8862 4848
✉️
Email Us
info@futurecool.dk
Menu

Cooling of the future today

We develop and produce sustainable CO₂ cooling systems for the future of cooling demand.

Our products

Discover our innovative range of CO₂ cooling solutions. Designed for commercial, industrial and educational purposes.

Product Modal - FutureCool

Training table

Technical Specifications

  • Refrigerant: R744 (CO₂)
  • Suction pressure: -45℃ / +15℃
  • Freezing: 1.8 kW (Po -30°C)
  • Cooling: 4.5 kW (Po -10°C)
  • Control range: 54% – 100%
  • High pressure: 120 bar
  • Low pressure: 80 bar
  • System charge: 10 kg
  • CE certified – Produced in Vejle
  • Dimensions: 140 × 100 × 185 cm

Key Features

  • Safety guards on pipes and gas cooler
  • Monitor with PI diagram and live data
  • Sight glass with moisture indicator
  • Oil separator with sight glass
  • Manual bypass on high pressure valve
  • Easily replaceable filter dryer
  • Manifold on LT and HT
  • Can run TE or AKV valve

Pacto Wood

Technical Specifications

  • Type: Pacto 4
  • Refrigerant: R744 (CO₂)
  • Suction pressure: -45℃ / +15℃
  • Control range: 60% – 100%
  • High pressure: 120 bar
  • Low pressure: 80 bar
  • Min/Max. temperature: -50℃ / +140℃
  • System charge: 10 kg
  • CE certified – Produced in Vejle
  • Dimensions: 120 × 40 × 80 cm

Key Features

  • Climate-friendly
  • Low noise
  • Danfoss control with intuitive display
  • 12 L receiver – no installation control
  • Cooling and freezing on the same system
  • Panasonic compressor – OH down to 0.5℃
  • Efficient oil separation and oil cooling
  • Pipe run up to 50 m
  • Vertical pipe run up to 15 m

Pacto

Technical Specifications

  • Type: Pacto 4
  • Refrigerant: R744 (CO₂)
  • Suction pressure: -45℃ / +15℃
  • Control range: 60% – 100%
  • High pressure: 120 bar
  • Low pressure: 80 bar
  • Min/Max. temperature: -50℃ / +140℃
  • System charge: 10 kg
  • CE certified – Produced in Vejle
  • Dimensions: 120 × 40 × 80 cm

Key Features

  • Industrial quality
  • Danfoss control with intuitive display
  • 12 L receiver – no installation control
  • Cooling and freezing on the same system
  • Panasonic compressor – OH down to 0.5℃
  • Efficient oil separation and oil cooling
  • Pipe run up to 50 m
  • Vertical pipe run up to 15 m

Pacto

Transcritical CO₂ condensing units developed and manufactured in Denmark.
  • Available with both 2 HP and 4 HP compressors.
  • Pipe length up to 50 m – vertical up to 15 m.
  • Refrigeration and freezing in one system.
  • 12 L receiver – no installation inspection required.
  • Efficient oil separation and oil cooling.
  • Danfoss control with a reliable, intuitive display.
Read More

Pacto Wood

Pacto condensing unit made with Thermowood®.
  • Climate-friendly
  • Low-noise operation
  • Natural design
  • Weather-resistant thermo treated wood
 
 
 
 
Read More

Training table

Intuitive training system for education in refrigeration technology and CO₂ cooling systems.
  • Sight glass – see phase change and liquid flow
  • Monitor with live PI diagram
  • Option to switch between AKV valve and thermostatic expansion valve
  • Manifolds with isolatable ports for components and service.
Read More

Cases

Selected CO₂ installations using FutureCool Pacto systems


Danfoss Kolding

 

  • Pacto 2: cold storage for canteen
  • Pacto 4: freezing storage for canteen
  • 47 meters of piping
  • Commissioned in 2020
  • Operating hours: 41.000 hours, 294.000 starts
 
Salfarm Denmark A/S

 

  • 116 m² cooing storage for veterinary medicin
  •  16 kW Cooling capacity
  • Commisioned in  2021
 
Royal Greenland – Pacto 4

 

  • Blast freezing of fish
  • Suction temperature −45 °C
  • Oil cooling
  • Commissioned in 2024
 
DJH, AAMS and FMS

  • Training system
  • 15 training tables with CO₂ unit for refrigeration and freezing
  • Training started in 2025
 
EWII Kolding – Pacto 4

 

  • 16 m² cold room and 16 m² freezer room in a canteen on a single system
  • 30 meters of piping between units and evaporators (15 meters vertical)
  • Commissioned in 2024
 
Danfoss Demonstration Plant

 

  • With cooling and freezing rooms
  • Simulated load using defrost heaters
  • Commissioned in 2025

Project system Futurecool Rack

  • High flexibility: Container solutions, arctic conditions, brine systems and possibility for Siemens S7 controller.
  • Low temperature: Down to −50 °C with ammonia brine or direct expansion.
  • High efficiency: Heat reclaim, suction gas- and flash gas heat exchanger with possibility for ejector.
  • Efficient oil separation: In-house development and production of oil separators.
  • Stainless steel piping and frame: Long service life, even in harsh environments.

We manufacture everything from condensing units to 40-foot container solutions with up to 500 kW of cooling or 350 kW of freezing capacity.

Over the past 20 years, we have built extensive expertise in designing systems for special, customer-specific applications. We specialize in low-temperature systems down to −50 °C, including blast freezers with capacities of up to 100 kW.

This places a high demand on the system in terms of oil separation and precise control of suction gas superheating. We design and manufacture our own oil separators and use both suction gas heat exchangers and suction accumulators with hot gas to ensure correct superheating without liquid slugging.

In addition, we have extensive experience in designing systems for harsh environments where there is either a high salt content in the air or large temperature variations. We also supply special evaporators for cold and freezer rooms with high humidity or saline conditions.

Project systems are generally constructed in stainless steel. This can include solutions with gas coolers and direct injection into evaporators, or plate heat exchangers with brine on the secondary side.

Educational system for Århus Maskinmesterskole med pladefryser.
Educational system for Århus Maskinmesterskole med pladefryser.
Keep track of the different pressure levels on the system from one place.
Keep track of the different pressure levels on the system from one place.
Educational system for Frederikshavn Maskinmesterskole.
Educational system for Frederikshavn Maskinmesterskole.
System with CRN certification for Canada. Capacity: 260 Kw at -50 C.
System with CRN certification for Canada. Capacity: 260 Kw at -50 C.
With two set of plate heat exchangers for both gascooling and heat reclaim.
With two set of plate heat exchangers for both gascooling and heat reclaim.
Plate heat exchanger for Ammonia water with pumps and buffertanks.
Plate heat exchanger for Ammonia water with pumps and buffertanks.
Cooling unit for Salfarm A/S. Cooling of veterinary medicine.
Cooling unit for Salfarm A/S. Cooling of veterinary medicine.
Low noise system for Meny. The frame is with spring isolator and noise absorbing panels.
Low noise system for Meny. The frame is with spring isolator and noise absorbing panels.

About
FutureCool

Futurecool A/S is a manufacturing company located in Vejle.

In 2023 we changed our name from JF Køleteknik A/S to Futurecool A/S. At the same time, we sold off our service department in order to focus exclusively on producing CO₂ refrigeration systems with capacities from 2 kW and up to 500 kW.

We built our first CO₂ refrigeration system in 2007.

Now, 200 systems later, we have gained solid experience across everything from condensing units to container-based solutions, and every day we insist on continuing to develop, optimise, and improve.

CO₂ The natural choice
Sustainable cooling solutions for a greener future
Scroll to Top